TEAC
TN-300-CH Belt-Drive Analog Turntable...
Rediscover your classic 33-1/3 and 45 RPM records on this affordable, fully automatic belt-drive workhorse. With its built-in switchable phono preamp, the AT-LP60 may be connected directly to your computer, home stereo and to other components that have no dedicated turntable input. The turntable is supplied with an integral Audio-Technica Dual Magnet™ phono cartridge with replaceable stylus.
Features
Fully automatic operation with two speeds: 33-1/3 and 45 RPM
Professional aluminum platter
Included cables connect to your stereo or powered speakers
Integral Dual Magnet™ phono cartridge with replaceable stylus
Switchable built-in pre-amplifier with line-level RCA output cables
Specifications
Type: Belt drive turntable, fully automatic
Motor: DC servo-controlled
Speeds: 33-1/3 RPM, 45 RPM
Turntable Platter: Aluminum
Wow and Flutter: Less than 0.25% (WTD) @ 3 kHz (JIS)
Signal-to-Noise Ratio: >50 dB (DIN-B)
Output Level: Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec
Output Level: Pre-amp “LINE”: 150 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain: 36 dB nominal, RIAA equalized
Power Supply Requirements: 120V AC, 60 Hz, 3W
Dimensions: 360.0 mm (14.17") W x 97.5 mm (3.84") H x 356.0 mm (14.02") D
Weight: 2.98 kg (6.6 lbs.)
Accessories Included: Dual RCA (female) to 3.5 mm (1/8") mini-plug (male) stereo adapter cable; dual RCA (female) to 3.5 mm (1/8") mini-plug (female) stereo adapter cable; 45 RPM adapter
Replacement Stylus: ATN3600L